TOWE AP RJ45-24E-1000M 1000M POE network lightning protect 19″ cabinet surge protection

80 % of buyers enjoyed this product!
In stock
Sale Price: $ 481.00
45 days Money back
45 days Money back Returns accepted if product not as described, buyer pays return shipping; or keep the product & agree refund with seller.
On-time Delivery
On-time Delivery
Guarantees: On-time Delivery 60 days


Products Description
TTS RJ45 1000M six twisted pair Ethernet data communications surge protector

Applied to the lightning region LPZ1- LPZ2 partition interface, providing full protection line 8. TTS-RJ45-E1000 / 8S can protect a 1000M Ethernet standard twisted-pair cable, RJ45-8E, 16E, 24E, respectively protection 8, 16 and 24 twisted-pair Ethernet standard six-way 1000M

Products Type
TTS-RJ45-E1000/8S TTS-RJ45-16E-1000M TTS-RJ45-24E-1000M TTS-RJ45-8E-1000M

Products Introduction

TTS RJ45 E1000/8S six Ethernet data line surge protector according to TIA / EIA 568B-2.1 and ISO / IEC 11801 standard design, E-Class is six cable or Ethernet cable structured cabling systems and other similar applications ideal the fully shielded surge protector. Universal RJ45 connection port, the product can be easily connected in front of the protected equipment; quality, high discharge capacity of surge protection devices and low capacitance, ultra-fast recovery diode matrix structure that provides high energy level protection for data lines coarse low energy and fine protection, which effectively absorbs and transfers the energy generated by lightning and surge impact and energy through the grounding cable into the earth, and ultimately protect sensitive electronic equipment from damage. Products with good frequency transmission characteristics, high-pass flow and fast response speed, can be widely used in office and industrial premises network cabling and similar data communication systems, such as the 1000M Ethernet, ATM, ISDN, VoIP network, PoE systems.

Product Features:

1 core device selected by an international brand, 8-wire full protection, superior performance, lightning fast response, can effectively prevent the various frequencies of lightning

2 multi-level protection, lightning currents can fight 5kA, and after testing authority, in accordance with international and domestic standards

3 insertion loss, when the 1000M is less than 0.3dB, guaranteed to reach 1000M rate

4 workmanship, easy to install, can be connected to a standard rail card, easy maintenance and management

TTS-RJ45-E1000/8S Schematics



Size Chart


RJ45-16/24E-1000M Size

Technical Data



TTS-RJ45-E1000 /8S

Nominal Voltage



Max.Countinous operation voltage


48V- / 34V



C2 line – the line between the nominal discharge current (8/20μs) L-L



C2 Total nominal discharge current 8/20μs



C2 line – between the ground nominal discharge current 8/20μs L-PG



C2 IN voltage protect level L-L



C2 IN voltage protect level L-PG



Insert Loss 250MHz


Max.transfer speed



Responce Time



protecting core wire

1/2, 3/6, 4/5, 7/8

Protect level


Input / output interface


Installation Rail


Operation Temperature


– 20+ 50


TTS-RJ45-E1000/8S primarily for a single Gigabit Ethernet port for surge protection, suitable for protecting a single computer or server, RJ45-8E/16E/24E protection respectively 8, 16 and 24 Gigabit Ethernet network standard twisted pair cabling standards applicable to lightning six systems SWITCH, HUB, ROUTER and computer network equipment, or other surge protection

Product Installation

LPZOB-1 interface or higher interface can be installed lightning protection district, while protecting all the way or gigabit network line. When installing wiring, signal data is protected line should be surge current end of the cable and ground wire unprotected contaminated; grounding wire should be grounded via the shortest possible path length not more than 1.5 meters; data cable bending radius not less than 35mm.

Note the direction of the cable out of the installation, there are “IN” and “OUT” sign. “IN” is always a non-protected side, and indicate the direction of voltage that may arise over the protection side “OUT” points to the protected area or equipment grounding conductor by equipotential connections should be installed as close to the equipment to be protected. TTS-RJ45-E1000/8S can be easily mounted on 15/35mm standard rail, RJ45-8E, 16E, 24E product is only one vertical unit height (1U), take up less space, and through 90 °, 180 ° and 270 ° rotating mounting bracket supports a variety of horizontal and vertical installation, particularly suitable for installation in a 19 “rack. attention out of the surge protector cable when installing wiring should be separated to avoid the emergence of a secondary coupling surge.

Product Maintenance

When routine maintenance and overhaul of the product, to measure the resistance between each pair twisted when megohms resistance is an order of magnitude, which means that the product is normal; When the resistance of only a few in Europe, which means that the product has been damaged, must be replaced immediately .

RJ45-E1000/8S wiring diagram

TTS-RJ45-8E/16E/24E network surge protector 19-inch rack installation diagram

DDN Telecom Data Line Protection: RJ45-DDN/4S

1000M Ethernet twisted-pair protection: RJ45-E1000/8S

16/24 port 10/100M Ethernet switch protection: RJ45-16E, RJ45-24E

single-port 10/100M Ethernet network protection: RJ45-E100/4S

Data center / central office network communication protection schematic

Tip: twisted-pair Ethernet surge protector Typically, network switches and servers arranged in the same room, and the close proximity, it is usually installed in the HUB Network mine entrance end, so you can protect the switch and server. If the port install surge protectors only NIC server, the server can only protect switch is still dangerous lightning surge invasion. For the possibility of being struck by lightning surges overhead lines maximum, this case should be separately install surge protectors in the home network at both ends.

Order information

Item no.





1000M Single-port Ethernet network protection



1000M 16 Ethernet Network Protection, 19 “standard rack mount



1000M 24 Ethernet Network Protection, 19 “standard rack mount



1000M8 Ethernet network protection, 19 “standard rack mount

Average Star Rating:
0 out of 5 (0 Ratings)
Name Rating Feedback
Shipping Company Shipping Cost Estimated Delivery Time
DHL 3 - 7 days
UPS Expedited 3 - 7 days
EMS 5 - 14 days
Post Air Mail Free Shipping 15 - 45 days
Return Policy If the product you receive is not as described or low quality, the seller promises that you may return it before order completion (when you click "Confirm Order Received" or exceed confirmation timeframe) and receive a full refund. The return shipping fee will be paid by you. Or, you can choose to keep the product and agree the refund amount directly with the seller.

N.B.: If the seller provides the "Longer Protection" service on this product, you may ask for refund up to 15 days after order completion.
Seller Service On-time DeliveryIf you do not receive your purchase within 60 days, you can ask for a full refund before order completion (when you click "Confirm Order Received" or exceed confirmation timeframe).

Customers Who Bought This Item Also Bought

Price:  $ 481.00 / piece